Connect the other end of the cable to the IP camera. Insert the included CD and run the IP search tool software.It's usually named as IP search tool, IP search,. Ip camera id002a free download - Perfect IP Camera Recorder, Perfect IP Camera Viewer, IP Camera Recorder, and many more programs.

• Please make sure if both the camera and computer is connected to your router's LAN port • Open the IPSetup Software which came on the CD along with the product • It will detect the camera's current IP address. You can change it to an IP address based on your network • The double click on that IP address or type it on IE's address bar. Camera's Live view will be shown up • Then you can match the wireless setting with your wireless router to view the camera wireless without being connected by a Ethernet cable May 15, 2010 . To set a static IP on the camera, do the following: 1. Chose an IP address for the camera that is outside your normal DHCP range but within your network subnet.

For example, if your router uses DHCP and gives out addresses in the range of 192.168.1.1 up to 192.168.1.10, you should chose an IP address beyond that (e.g. Login to your camera's current IP address and go to Setup -> Network setup 3. Turn off DHCP and type in the IP address that you chose into the configuration. Upgrade firmware alcatel ot 991. Restart your camera. The above should fix your Static IP address question. With regards to your Wireless question, you should make sure of the following: 1. Your router is set to broadcast its SSID 2.

Your router is setup to use WPA (not WPA2) 3. Your AES password in the camera config is the same as that as the routers Hope this helps Nov 24, 2009 .