The Plugable USB 3.0 SATA Hard Drive Docking Station is a convenient way to connect SATA hard drives to any computer with a USB port. It’s compatible with both USB 2.0 and 3.0 and either 2.5″ or 3.5″ drives. Becuase the drivers are included in all major operating systems it’s as simple as plug and play so there’s nothing to install. If you do have problems, there are many different issues that can cause your SATA Dock to misbehave – among them are drive format, disk failures, and permissions issues. This troubleshooting guide will help you through the process of getting your USB3-SATA-U3 up and running at USB 3.0 speed. Accugrid manual pdf. Initial Setup — The first step is to connect your SATA Dock to AC power and to an active USB port.

With no drive inserted you should see the green light illuminated like this. The ‘A’ and ‘B’ ends of a USB 3.0 cable.

We’ll start with the USB 2.0 cable. Once we have everything working on USB 2.0 we’ll move up to USB 3.0 – if it’s available on the host computer. Connect the USB 2.0 cable to the docking station and to a known good USB port on your computer. To verify that the port is working, test with a simple device like a wired USB mouse. Windows troubleshooting steps — click for.

First power off the dock and insert the drive. The Plugable USB3-SATA-U3 Hard Drive Docking Station is compatible with both 2.5″ laptop sized drives and 3.5″ desktop sized drives. Be sure to line up the connectors inside the slot with the connectors on the drive and push the drive into the slot firmly until it seats on the connector. Once your drive is installed, power on the dock with the switch on the back. After a minute or so, you’ll see an “installing new hardware” message and if the drive is recognized and mounted successfully you’ll see this. Click on image to enlarge. You should see the disk listed, probably as unallocated space.

Right click on it and choose “New Simple Volume”. Follow the wizard to format and initialize your new disk.

Because the actual docking station itself doesn't need a driver, manufacturers don't supply one. Digitech sata hdd docking station driver Instructions for use and download of digitech sata hdd docking station driver tool are here: Thanks and best wishes! Net and Purch hereby disclaim all responsibility and liability for the content of Computing.

Hubungan keduanya semakin hari semakin dekat. Download film taiyou no uta 720p hd free.

Once the wizard finishes, your disk will be available to Windows. Simply open Windows Explorer, it will be listed under “Computer” in the list of available drives. If your machine is equipped with USB 3.0, we can now safely eject the drive and reconnect it with the USB 3.0 cable to a USB 3.0 port on your computer. To do this click on the USB icon in the lower right of the screen and select “Eject MassStorage Device”. Using the USB 3.0 cable that came with your USB3-SATA-U3 Hard Drive Docking Station, connect your dock to a USB 3.0 port on your computer.